Emco compact 8, Инструкция / Перечень запасных частей

Страница: 18 / 57

l.aoinet stana
Assembly of cabinet stand:
Put up left(A) and right (Bl stand. Screw both angle
irons ( C) with 2 bolts each (MB x 12 DIN 933) to stand
A respectively B.
Bolt steel flats (D) and mid-portions (E) together (4
nuts MB). Bolt assembled mid-portions (El to both
stands (A and Bl (8 nuts MB, DIN 934 and 8 lock was­
hers DIN 127).
Screw supporting bolts for inserts (J) in place (2 bolts
M5 x 8, 2 bolts MS x 12 DIN 933, nuts on inside of
stand).
Put on rubber pads (F), rubber packings (G) and trays
(H). Bolt both cover plates (1) to left stand (2 nuts
each).
Fit inserts (J) into left stand (A). Mouot cabinet door
on hinges. Mount machine in position and bolt it with
,2 bolts M 10 x 35 DIN 933 to cabinet stand.
Hold down rubber packing with left hand.
Then bend rubber packing with right hand upward and
press it bit by bit onto the rim of the cabinet stand.
NOTE: When mounting the rubber packing, do not
stretch it!
2 - ---- -
3 ----- -
2 -
----
3 -- --
8 - - ---
7 -
---
�
2
2
-
---
s
�---
6
1 2 1
17
2
1)
2)
3)
4)
5)
6)
7)
1 1
6('.)D>
MS x 12 DIN 933
18
�
MS DIN 934
8
@
AS
DIN 127
4
�
M6
DIN 934
2
(:)It
M10x35 DIN 933
2
®
810,5
0IN125
2()1t
M5x8
DIN 933
2
®
MS
DIN 934