EMBRON Hatteland HD 19T22, Руководство пользователя

Страница: 34 / 142

34
Installation Procedures
Installation
IND100078-48
▼ 5: Please note the Factory Mounted Torx screws on both bracket sides, THESE ARE NOT TO BE ADJUSTED OR
LOOSENED!
▼ 6: Fasten the complete unit to your table/desktop location, and tilt it into the desired position. Locate the Set Socket Screws
on both brackets decribed in step 3. Secure all 3 Set Top Screws on both sides, use Torque Force 7Nm on all. If you need to
re-adjust the tilting later, place your hand on top of the Display/Panel Computer unit to keep it steady, and loosen minimum two
of any Set Top Screws on both brackets, adjust unit into new tilting angle, and fasten the Set Top Screws again. Verifiy that the
unit does not tilt by itself and appear fixed in-place.
▼ ▼ Alternative Mounting: Depending on installation needs, you may mount the complete unit in ceiling in two different ways.
Upside Down Position: User Controls will be upside down, cables go straight up. You may configure Glass Display Control ™
(GDC) LED symbols to show or not, since symbols will be seen upside down. Displayed image needs to be flipped vertically.
Review the appropriate SCOM manuals (“Glass Display Control™ (GDC) LED & Button operations” section).
Normal Position: User Controls readable, no image flip needed, cables has to bend up or go straight down.
Upside Down
Normal Position