61
© 2021, Elon Group AB. All rights reserved.
3.3 How to use
3.3.1 Start cooking
Touch the ON/OFF control for three
seconds. After power on, the
buzzer beeps once, all displays
show “–” or “– –”, indicating that
the induction hob has entered the
standby mode.
Place a suitable pan on the
cooking zone that you wish to
use.
• Make sure the bottom of the
pan and the surface of the
cooking zone are clean and dry.
Touch the heating zone selection
control, and an indicator next to
the key will flash.
Select a heat setting by touching
the slider control.
• If you don’t choose a heat
setting within 1 minute, the
induction hob will automatically
switch off. You will need to start
again at step 1.
• You can adjust the heat setting
at any time during cooking.
Touch the heating zone selection
control that you wish to switch off.
Turn the cooking zone off by touching
the slider at “○”. Make sure the
display shows “0”.
Turn the whole induction hob off by
touching the ON/OFF control.
Beware of hot surfaces
H will show which cooking zone is
hot to touch. It will disappear when
the surface has cooled down to a
safe temperature. This can also be
used as an energy-saving function
if you want to heat further pans, by
using the hotplate that is still hot.
3.3.2 Finish cooking
If the display flashes
alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking
zone.
No heating takes place unless there is a suitable pan on the
cooking zone. The display will automatically turn off after 2
minutes if no suitable pan is placed on it.
.
Содержание CIH4661S
