_________________________________________________________________________________
_________________________________________________________________________________
78 TAU-72.IP/TAU-36.IP Universal Network Terminal
prefixes beginning with the same digit, but having different configurations of this setting, then a prefix
with the highest priority will be responsible for determining whether the 'PBX response' tone will be
sent or not.
To apply changes, click '
Submit Changes'
button; to discard all changes, click
'Cancel'
.
To edit parameters of existing prefix, you may directly modify data in fields, of call the edit menu by
clicking
button in the respective row. To delete a prefix, click
button.
To discard all changes made to configuration, click
'Undo All Changes'
button.
To apply changes, click
'Submit Changes'
button. To store changes to non-volatile memory of the device, click
'Save'
button.
5.1.2.2.5.2 Configuration of Prefix with Varying Number Count
Enables dialling by a single prefix with various quantity of digits using
Dialplan Table
.
Prefix should be configured as follows:
6
In
'Min digits'
field, enter a minimum quantity of digits for routing with this prefix.
7
In 'Timeout' field, dialling timeout for the next digit of a number should be greater than zero. In
this case, when user dials the number with length that matches the minimum quantity of digits,
gateway will wait for the next digit dialling during the specified timeout. If the digit is not dialled,
prefix call will be performed with the minimum quantity of digits; if the digit is dialled, the timer
will restart, and the gateway will wait again for the next digit dialling.
8
If dialling timeout for the next digit is zero, the call will be routed immediately when the length of
a number equal to minimum quantity of digits is achieved.
9
'Stop
dial
at #'
function allows to perform a call after the necessary quantity of digits are dialled
without the wait for a timeout. It may be configured separately for each port in
'PBX/Ports/Edit/Custom'
tab. If this function is enabled for the port, user upon dialling a necessary
number, the port may press # button on the phone unit (provided that the unit is configured for
DTMF dialling mode), and after that the call will be routed immediately.
5.1.2.2.5.3 Configuration of pickup codes
Configuration of pickup groups affects the following settings:
Configuration of pickup groups affects the following settings:
–
Prefix
—pickup code. Sequence of digits (for example, *8) that, when dialled, allows any subscriber of the
group to pickup the call received by another subscriber of the group.
