_________________________________________________________________________________
_________________________________________________________________________________
TAU-72.IP/TAU-36.IP Universal Network Terminal 163
rtcp_period
The voice frequency path status control
function Defines the period of time, during
which the opposite side will wait for RTCP
protocol packets When there is no packets in
the specified period of time, established
connection will be terminated. Control
period value is calculated using the following
equation: RTCP timer* RTCP control period,
seconds.
2-65535
rtcp_timer
Time period for control packet transfer via
RTCP protocol, in seconds
5-65535
rtcp_xr
Send
RTCP Extended Reports packets
0–disable
1–enable
comfortnoise
Comfort noise generator
0–disable
1–enable
jb_pt_delay
Size of a fixed jitter buffer, used in fax or
modem data transfer mode (ms)
0-200
jb_vo_delay_min
Size of fixed jitter buffer or lower limit
(minimum size) of adaptive jitter buffer (ms)
0-200
jb_vo_delay_max
Upper limit (maximum size) of adaptive jitter
buffer (ms)
jb_vo_delay_min-200
jb_vo_adaptive
Use fixed or adaptive jitter buffer operation
mode
0–fixed
1–adaptive
jb_vo_del_threshold
Threshold for immediate packet deletion
(ms):
- If call quality is more important than delays,
we recommend to set the maximum value
for this setting—500ms.
- And vice versa, if delays have a priority over
the quality, we recommend to set the
minimum value for this setting.
- It is recommended, that 'Delay threshold'
was greater than 'Delay max' for at least of
50ms.
jb_vo_delay_max-500
jb_vo_del_mode_soft
Setting defines the method of packet
deletion during buffer adjustment to lower
limit.
0—Hard mode
1—Soft mode
t38_bitrate
Maximum fax transfer rate
9600, 14400
t38_datagram
Maximum datagram size
272-512
rfc3264_pt_common
When performing outgoing call, receive
DTMF tones in rfc2833 format with payload
type proposed by a communicating gateway;
otherwise, tones will be received with the
payload type, configured on the gateway.
Enables compatibility with gateways that
incorrectly handle rfc3264 recommendation
0–disable
1–enable
regexprd
—
configuration of gateway numbering schedule using regular expressions
regex_on
Configuration of a numbering scheme based
on regular expressions
0—use dialplan, described in
dialplan
section
1—use numbering scheme based on
regular expressions
proto
Signalling protocol
sip—SIP protocol
h323—H.323 protocol (for profile_0
only)
