ELTEX TAU-36.IP, Руководство по эксплуатации

Страница: 30 / 205

_________________________________________________________________________________
_________________________________________________________________________________
30 TAU-72.IP/TAU-36.IP Universal Network Terminal
42—NTP server address.
43—specific vendor information (for option usage, see subsection 'TR-069 Monitoring and
Management Protocol Settings' below).
60—specific vendor information (for option usage, see subsection 'DHCP Options' below).
66—TFTP server address (for option usage, see subsection 'Autoupdate Settings' below).
67—name of the file with firmware versions and configurations (for option usage, see
subsection 'Autoupdate Settings' below).
82—agent informational parameter (Agent Circuit ID and Agent Remote ID suboptions).
120—outbound SIP servers (for option usage, see Section 5.1.2.2.3 ).
121—classless static routes (for option usage, see Section 5.1.1.3 ).
–
Get GW via DHCP – when checked, use default gateway obtained via DHCP.
–
Default gateway – default address of a network gateway. I.e. the address of a gateway that receives all
the traffic falling outside the scope of every static routing rule.
–
Primary DNS IP – primary DNS server address. To use a local DNS, enter IP address 127.0.0.1 into the
field.
–
Secondary DNS IP – secondary DNS server address.
DHCP Options:
–
Alternative option 60 enable – when checked, use alternative Option 60 value, specified by user.
Otherwise, in Option 60 DHCP request the device will send specific vendor information in the following format:
[VENDOR: vendor ][DEVICE: device type ][HW: hardware version ][SN: serial number ][WAN: МАС
address ][VERSION: firmware version ]
where
–
Vendor— Eltex.
–
Device type—depends on factory settings.
–
Serial number—depends on factory settings.
–
МАС address—depends on factory settings.
You may check factory settings and firmware version in 'System info' tab (5.3.2) of the web interface.
Example:
[VENDOR:Eltex][DEVICE:TAU72][HW:0x21][SN:MS5370043][WAN:00:01:09:44:33:22][VERSION:2.10.0]
–
Alternative option 60 value – alternative Option 60 value (format: string), specified by user.
–
Option 82. Agent Circuit ID – allows to add Option 82, Suboption 1 — Agent Circuit ID, into DHCP
request.
–
Option 82. Agent Remote ID – allows to add Option 82, Suboption 2 — Agent Remote ID, into DHCP
request.