manualshive.com logo in svg

Eltek 242100.410, Руководство пользователя, Страница: 25 / 36

Поделиться
Скачать
Eltek 242100.410 Скачать руководство пользователя страница 25

About Power System Configuration

User Guide •

 

Smartpack S Controller

 25

350030.013, 1v0-2012-06 

•  Software Upgrade

 

which offers you to upgrade the firmware in connected controllers and 

control units, by uploading files stored in the controller’s data storage 

device.  

Read topic 

"SD Card Storage - Overview Firmware Files (Binary Format)" on 

page 25, 

or topic 

"Flash Memory Storage" on page 26 

 

Example of some of the available options in controller’s submenu: 

 

Up/Download > Software Upgrade

#

Description

SW Info

Note

Compack 11

405006.009

0A.M

Smartpack1

402073.009

3.05E

I/O Unit 1

402088.009

3.01

SD Card Storage - Overview Firmware Files (Binary Format)

You can store binary files in the 

Smartpack2 Master

 controller’s SD card (data stor-

age device) and use them for firmware upgrading of controllers and control units, 

as well as for exporting and importing configuration files.

Notice:  

All firmware upgrade and configuration files stored in the SC card must have specific file 

names.

The SD card uses the 8.3 file name format. Before using the files stored SD card, 

you must rename them, so that they conform to the specific file names described 

below. 
For example, if you receive the file “SmartPack2_Basic_405007.009_V1.1.mhx” to 

upgrade your 

Smartpack2 Basic

 controller firmware to version 1.1, you must first 

rename the file to exactly “SP2BAS.MHX”, then copy the file to the SD card and fi-

nally insert the SD card in the 

Smartpack2 Master

 controller to start the firmware 

upgrade process.

#

CAN Node

File Name

File Type

CAN Node Type

Smartpack2 Master

SP2MAST.BIN

Firmware upgrade

Controller

Smartpack2 Basic

SP2BAS.MHX

Firmware upgrade

Controller

Smartpack

SP.MHX

Firmware upgrade

Controller

Smartnode

SMARTNOD.MHX

Firmware upgrade

Control Unit

Battery Monitor

BATTMON.HEX

Firmware upgrade

Control Unit

Load Monitor

LOADMON.HEX

Firmware upgrade

Control Unit

AC Mains Monitor

MAINSMON.HEX

Firmware upgrade

Control Unit

I/O Monitor

IO_UNIT.HEX

Firmware upgrade

Control Units: I/O Monitor, Monitor2 & Monitor3

Any node

UNIT_aa.HEX

Configuration File (Save/Load)

All types

 The “aa” refers to the CAN bus address or ID number.  

E.g. “UNIT_82.HEX” could be the configuration file for I/O Monitor with CAN bus address 82.

Содержание 242100.410





































Отзывы:

Нет отзывов