Eltek 242100.410, Руководство пользователя, Страница: 23 / 36

About Power System Configuration
User Guide • Smartpack S Controller
23
350030.013, 1v0-2012-06
Example of Battery Test Log table displayed in Smartpack S Controller’s submenu:
Logs/Report > Battery Test Log
# StartTime Durat. Typ Descr Amp Q% EndV Note
09:58 34 Manual ----------------- -68 70% 45.49 ----------------
Using WebPower or PowerSuite you can also display the test results for a battery
test in a line graph.
Inventory Report
The Inventory Report presents information that describes the power system, the
site’s name , serial number, installation and service dates, software name, etc.
Example of Inventory Report table in
Smartpack S Controller’s submenu:
Logs/Report > Inventory Report
# Description Note
Company
Site
Model
Install Date
Serial N
Service Date
Responsible
Message 1
Message 2
(Installed HW and SW info, part #, serial #, version #, etc.)
6 - Statistics options
This logical group collects and presents relevant system data and calculated sta-
tistics, such as average results, peak values, etc.
Example of the Statistics table available in
Smartpack S Controller’s submenu:
Statistics
# Description Reset Average Peak Note
BatteryVoltage

No 52,48 52,61
BatteryCurrent

No -35 0
Battery Temp

No 41 0
Load Current

No 35 50
Rectifier Current

No 75 120
Mains Volt 1

No 225 235
7 - Commissioning options
This logical group presents a generic description of the steps required to carry out
commissioning tasks of the power system.
Refer also to the system’s user documentation, and to the Commissioning Proce-
dure pull-out list in the system’s quick start guide.