The Smartpack S Controller
User Guide •
Smartpack S Controller
15
350030.013, 1v0-2012-06
Controller Access — Via Stand-alone PC
You can access the
Smartpack S
controller directly from a stand-alone computer,
or via a Local Area Network (LAN) if available.
Each controller is shipped with a unique
Eltek
MAC address stored inside the con-
troller and marked on the controller’s label, and with the fixed IP address
<192.168.10.20>.
Do following to access the controller:
1. Start the “Eltek Network Utility”
(EVNU) program
(EVIPSetup.exe)
2. Connect the computer to the controller
; (see page
check its MAC address is displayed
3. Find the computer NIC’s IP address
and subnet mask
(network card)
Tip:
using DOS command IPCONFIG, in a Command Prompt
window
e.g. computer’s IP address <169.254.52.132> Subnet
mask <255.255.0.0>
4. Change the controller’s IP address
and Network Mask
to be in the same range as the computer’s
Tip:
Using the EVNU program,
1. Select the controller,
2. Click in the “Configuration” button
3. Change e.g.
from default <192.168.10.20> <0.0.0.0>
to IP address <169.254.52.133> <255.255.0.0>,
4. Click on the “Enable Static IP” button
Notice:
Check that the IP address <169.254.52.133> is
not used, e.g. issuing the DOS command: “Ping
169.254.52.133“
5. Access the controller’s
configuration pages
in your Web browser, e.g. clicking the “Web Interface”
button in the EVNU program
6. Log in
with the <admin> account,
7. Change the controller’s Device Name
After accessing the controller, you can configure and monitor the power system
using a standard web browser (via
WebPower
) or via the
PowerSuite
program.
Pow-
erSuite
’s newest version is always available on our FTP server. Contact your clos-
est
Eltek
representative.
For detailed functionality description, browse and search through the Functionality
Description Help file (or 350020.073) or
WebPower Online Help
file.
Smartpack S
Controller
WebPower
(Web-based user interface)
Ethernet
cable (LAN)