Eltek 242100.410, Руководство пользователя, Страница: 17 / 36

The Smartpack S Controller
User Guide • Smartpack S Controller
17
350030.013, 1v0-2012-06
Firmware Upgrade Controller
Upgrade of the Smartpack S controller’s firmware, while the system is live, is per-
formed via the controller’s Ethernet port, using the “ Eltek Network Utility” program
(EVIPSetup.exe) to transfer the firmware file to the controller.
Upgrading the firmware does not delete or change any of the configuration and
calibration values stored in the controllers.
You can upgrade the
Smartpack S controller’s firmware using the following meth-
od.
Figure 6. Example of Smartpack S controller’s firmware upgrade via PC
Do following:
• Slide out the controller’s display module
Refer to chapter "Accessing the Controller’s Ethernet Port" on page 8
• Connect a PC to the Smartpack S controller
plugging one end of a standard Ethernet cable to the PC and the other
end to the controller’s Ethernet port
• Start “EVIPSetup.exe” ,
the “ Eltek Network Utility” program in the PC
• Select the Smartpack S controller ;
using the EVNU program, check correct MAC and IP address and the
correct firmware file < Smartpack S _(part #)_(version #)_APP.s19>
Refer to topic "Controller Access — Via Stand-alone PC" on page 15
• Click on the “Update Software” button
in the EVNU program
For more detailed description, browse and search through the Functionality De-
scription Help file (or 350020.073) or WebPower Online Help file.
Smartpack S
Controller
WebPower
(Web-based user interface)
Ethernet
cable (LAN)