manualshive.com logo in svg

Elster F96Plus, Инструкция по установке и эксплуатации, Страница: 40 / 60

Поделиться
Скачать
Elster F96Plus Скачать руководство пользователя страница 40

40 

Analogue output module 

NOTE 

The board contains two 2 wire terminals for the two analogue outputs; output 1 is 
marked “+ 1 –” and output 2 “+ 2 –” (Fig. P, page 22). 

 

Connect the cable for analogue output 1 to the terminals marked “+” and “-” of terminal 1. Connect 
the cable for the second analogue output to the terminals marked “+” and “-” on terminal 2. 
Observe the correct polarity.

 

6.4 

Connecting the mains voltage 230 V / 24 V 

DANGER 

Before you connect the mains cable, be sure that no mains voltage is existing. 

Risk of serious injuries or death! 

Please take care that the mains voltage corresponds to the mounted mains unit. 

Fig. EE  Meter with mains unit 

1. Remove the top part of the calculator

2. Dismount the terminal cover of the mains unit

3. Install the mains cable via the wire protecting sleeve

 

into the bottom part of the calculator

4. Connect the cable according the labelling of the terminal

5. Reinstall the terminal cover

6. Mount the top part of the calculator back

7. Turn on the mains voltage again

   Error E - 8 disappears automatically from the display when the mains voltage is available. 

8. The calculator has the be protected against manipulation (sealing)

Содержание F96Plus





























































Отзывы:

Нет отзывов