Elster F96Plus Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 60

Elster F96Plus Скачать руководство пользователя страница 36

36

1. Remove the seal from the calculator housing and open the calculator by releasing the side catches.

2.

Take the top part of the calculator and turn it so that the inside of the calculator is facing you. You
can simplify installing the modules by using the two openings in the top part to place this on the
bottom part (Fig. DD, item 1).

Fig. DD Installation position of top part

1

Openings in the top part for placing on the bottom part

3. Insert the module in the relevant slot (Fig. CC, page 34), secure with the fixing lugs and carefully

connect the pre-formed ribbon cable at both ends.

4. Now remove the top part from the installation position, turn it and replace it in the correct position

on the bottom part of the calculator.

5.

Check the meter for correct operation before sealing the housing cover. The meter is equipped with
automatic detection for detecting which module is inserted in which slot (port). The detection result
is shown in loop 3 of the display in two different sequences (windows) for port 1 and port 2. This
display automatically changes between “Port 1” and “Port 2” and the relevant module number
(module code).

1

1

«
...
34
35
36
37
38
...
»

Содержание F96Plus





























































Отзывы:

Нет отзывов