20
Setting of parameters
Wind Sensor KNX W
• Date of issue: 31.10.2012 • Technical changes reserved. Errors reserved.
6.4.1. Linkage inputs of AND Logic
do not use
Communication object logic input 1
Communication object logic input 1 inverted
Communication object logic input 2
Communication object logic input 2 inverted
Communication object logic input 3
Communication object logic input 3 inverted
Communication object logic input 4
Communication object logic input 4 inverted
Communication object logic input 5
Communication object logic input 5 inverted
Communication object logic input 6
Communication object logic input 6 inverted
Communication object logic input 7
Communication object logic input 7 inverted
Communication object logic input 8
Communication object logic input 8 inverted
Malfunction wind
Malfunction wind inverted
Wind threshold value 1
Wind threshold value 1 inverted
Wind threshold value 2
Wind threshold value 2 inverted
Wind threshold value 3
Wind threshold value 3 inverted
6.4.2. OR Logic 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8
All settings of the OR logic correspond to those of the AND logic.
6.4.3. Linkage inputs of OR Logic
The linkage inputs of the OR logic correspond with the parameters of the
AND logic. The OR logic is additionally provided with the following inputs:
AND Logic output 1
AND Logic output 1 inverted
AND Logic output 2
AND Logic output2 inverted
AND Logic output 3
1. / 2. / 3. / 4. Input
• do not use
• all switching events which the sensor pro-
vides (see “Linkage inputs of the OR logic”)
Logic output sends
• one 1 bit object
• two 8 bit objects
