elsner elektronik KNX W 230 V, Установка и настройка

Страница: 20 / 23

19 Setting of parameters
Wind Sensor KNX W • Date of issue: 31.10.2012 • Technical changes reserved. Errors reserved.
6.4. AND Logic 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8
Logic output sends “one 1 bit Object“:
Logic output sends “two 8 bit objects“:
1. / 2. / 3. / 4. Input • do not use
• all switching events which the sensor
provides (see “Linkage inputs of the AND
logic”)
Logic output sends • not
• one 1 bit object
• two 8 bit objects
Logic output sends one 1 bit object
if logic = 1

object value 1 • 0
if logic = 0

object value 1 • 0
Communication object
AND Logic 1 sends • in case of the change of logic
• in case of the change of logic to 1
• in case of the change of logic to 0
• in case of the change of logic and
cyclically
• in case of the change of logic to 1 and
cyclically
• in case of the change of logic to 0 and
cyclically
send cyclically every
(only if sending “cyclically”)
5 sec … 2 h
Logic output sends two 8 bit objects
if logic = 1

object A value 0 … 255; 127
if logic = 0

object A value 0 … 255
if logic = 1

object B value 0 … 255; 127
if logic = 0

object B value 0 … 255
Communication objects
AND Logic 1 A and B sends • in case of the change of logic
• in case of the change of logic to 1
• in case of the change of logic to 0
• in case of the change of logic and
cyclically
• in case of the change of logic to 1 and
cyclically
• in case of the change of logic to 0 and
cyclically
send cyclically every
(only if sending “cyclically”)
5 sec … 2 h