32
Setting the parameters
KNX eTR 205/206 Light push button
• Version: 16.12.2020 • Technical changes and errors excepted
Specify here what the LEDs for temperature display should indicate.
9.7. Buttons
KNX eTR 205/206 Light
has an area control, i.e. if you touch multiple buttons at the
same time, you can activate another function. The value (0 or 1) can be set for the eval-
uation of the activation of the surface operation.
Set whether you want to use the screen control.
Press the required button for light control. The menus for the additional settings of the
buttons are then displayed.
9.7.1. Light 1 / 2
Here you can set the time between switching and dimming and whether the dimming
command is to be repeated.
LEDs for temperature display
• display actual value only
• display only target value/base shift
• display actual value and target value/base
shift
Use screen control
No • Yes
Use screen control
Yes
Activation object assessment
• Value 1 = active | Value 0 = inactive
• Value 0 = active | Value 1 = inactive
Object value after reset
0 • 1
Function
• Switch
• Selector switch
• 8 bit value 0 ... 255
• 8 bit value 0 ... 100%
• 16-bit floating point value
• Scenario recall
Value (
switch
)
0 • 1
Value (
8 bit value 0 ... 255
)
0 • ... • 255
Value (
8 bit value 0 ... 100%
)
0 • ... • 100
Value in 0.1 (
16 bit value floating point
)
-6707600 • ... • 6707600; 10
Scenario number(
Scenario recall
)
1 • ... • 64
Use light 1
No • Yes
Use light 2
(only with KNX eTR 206 Light)
No • Yes
Time between switching and dimming
(in 0.1 s)
0 • ... • 50; 5
Repeat the dim command
No • Yes
Repetition of the dimming command
Yes
Содержание 71160
Страница 2: ......