31
Setting the parameters
KNX eTR 205/206 Light push button
• Version: 16.12.2020 • Technical changes and errors excepted
9.6. LEDs
Set the LED mode.
All LEDs as ambient lighting
If all LEDs are to be used as ambient lighting, illuminate all simultaneously. Set the
brightness of the LEDs, whether objects are used and whether the LEDs switch off au-
tomatically after pushing the button.
All LEDs individually controllable
This is where you set the brightness of the LEDs, whether objects are used and whether
the LEDs switch off automatically after pushing the button.
Manual level after reset (
only if manual
mode has been selected
)
0 • 1 • 2 • 3
LED mode
• All LEDs off
• All LEDs as ambient lighting
• All LEDs individually controllable
LED mode
All LEDs as ambient lighting
Brightness
0 ... 100%; 30%
Use objects
No • Yes
Object value on/off after reset
(
if objects are used
)
0 • 1
Use automatic switch-off after pressing a
button
No • Yes
Switch off after
(is automatic switch off is
used)
1 ... 255; 30 secs. after pressing
LED mode
All LEDs individually controllable
Brightness
0 ... 100%; 30%
Use objects
No • Yes
Object value on/off after reset
(
if objects are used
)
0 • 1
Function LED 1 (top left) / 2 (top right) / 3
(bottom left) / 4 (bottom right)
• always OFF
• On after pressing button for settable time
• On for object value = 1 /
Off for object value = 0
Lighting period after pressing (
if "On after
pressing button for a settable time"
)
1 ... 5 seconds ; 3 seconds
Object value after reset (
if "On for object
value = 1 / Off for object value = 0
)
0 • 1
Use block object (
if "On for object value = 1
/ Off for object value = 0
)
No • Yes
Содержание 71160
Страница 2: ......
