elsner elektronik 71160, Установка и настройка

Страница: 35 / 38

33 Setting the parameters
KNX eTR 205/206 Light push button • Version: 16.12.2020 • Technical changes and errors excepted
9.8. Logic
The device has 8 logic inputs, 2 AND and 2 OR logic gates.
Activate the logic inputs and assign object values up to 1st communication.
Activate the required logic outputs
AND logic
OR logic
9.8.1. AND logic outputs 1/2 and OR logic outputs 1/2
The same setting options are available for AND and OR logic.
Each logic output may transmit one 1-bit or two 8-bit objects. Determine what the out
put should send if logic = 1 and = 0.
If the output type is a 1-bit object , set the output values for the various conditions.
Repeat the dim command
on long button press every 0.1 s • ... • every 2 s; every 0.5 s
Dimming by 100% • ... • 1,5%; 6%
Use logic inputs No • Yes
Object value prior to 1st communication for
- Logic input 1 ... 8 0 • 1
AND logic 1/2 not active • active
OR logic 1/2 not active • active
1. / 2. / 3. / 4. Input • Do not use
- Logic inputs 1...8
- Logic inputs 1...8 inverted
• all switching events that the device
provides
• Temperature sensor malfunction = ON
• Temperature sensor malfunction = OFF
Output type • a 1-bit-object
• sends two 8-bit objects
Output value
if logic = 1 1 • 0
Output value
if logic = 0 1 • 0