12
Channel setting in the ETS
Remote control Remo KNX RF
• Version: 14.02.2018 • Technical changes and errors excepted.
Functions:
The channel can be configured for switching, dimming, drive control (shutters, blinds, awn-
ings or windows), temperature or scene functions.
Switching:
If the channel should be used to switch a channel on and off (switching actuator), select the
‘Switching’ function and determine if after completing a switching command, feedback
should be sent to the remote control.
Dimming:
If the channel should be used to dim a light (dimming actuator), select the ‘Dimming’ func-
tion and determine if after completing a dimming command, feedback should be sent to the
remote control.
Then set the time interval between switching and dimming; if desired, set the repeat inter-
val and the percentage value for long button press.
Shutter:
If the channel should be used to control a shutter, select the ‘Shutter’ function and set
whether, after completing a movement command, feedback for the movement and/or slat
position should be sent to the remote control.
Function
• Switching
• Dimming
• Shutter
• Blinds
• Awning
• Window
• Temperature
• Scene
Function
Switching
Use feedback
No • Yes
Function
Dimmer
Use feedback
No • Yes
Time between switching and dimming
(in 0.1 s)
1...50; 5
Repetition of the dimming command
No • Yes
Repetition of the dimming command
on long button actuation
(if dimmer command is repeated)
every 0.1 s... • every 2 s; every 0.5 s
Dimming by
(if dimmer command is repeated)
1.50% • 3% • 6% • 12.50% • 25% • 50%
Function
Shutter
