5
First use/set-up
Remo KNX RF remote control
• Version: 14.02.2018 • Technical changes and errors excepted.
2.
First use/set-up
2.1.
Loading the battery, transport block
First, charge the integrated battery of the remote control with a standard commercial USB
charging device (USB 2.0 Micro B connector). Charging will reset the transport block that is
active on delivery. The remote control can be used only once it is connected to the power
supply via the charging cable.
If necessary, the transport block can be reactivated within the
System
menu (see manual,
chapter
System
).
The battery of the device cannot be removed or replaced. When disposing of the device,
observe the guidelines for disposing of devices with an integrated battery.
2.2.
Protective film
Remove the protective film from the display.
2.3.
Set-up procedure
1. Required: Configuration of the channels in the ETS (version 5 and later).
See manual, chapter
Setting the channels in the ETS
.
2. Required: Programming the device
See manual, chapter
Programming the remote control
.
3. Optional: Change the names and the channel sequence in the
wireless channel config-
uration
menu.
See manual, chapter
Wireless channel configuration
.
Charging
socket
Battery charging status indicator
