ELSA LANCOM Business LC-4X00, Руководство пользователя

Страница: 26 / 276

Configuration modes
ELSA LANCOM Business
16
search. You will only need to specify the local area network if using the inband solution,
and then you're off.
Once ELSA LANconfig has finished its search, it displays a list of all the devices it has
found, together with their names and, perhaps a description, the IP address and its
status.
Double-clicking the entry for the highlighted device and then clicking the Configure
button or the Edit
왘
Edit Configuration File option reads the device's current settings
and displays the 'General' configuration selection.
The remainder of the program's operation is pretty much self-explanatory or you can use
the online help. You can click on the question mark top right in any window or right-click
on an unclear term at any time to call up context-sensitive help.
Start up inband configuration using telnet
Start up inband configuration using telnet with the command:
telnet 10.1.80.125
Telnet will then establish a connection with the device using the IP address.
Once you have entered the password, configuration can be carried out using any of the
commands contained in section 'Configuration commands'.
Remote access: configuration using a dial-up
connection
Configuring routers at remote sites is particularly easy using the remote configuration
method via a dial-up connection. The device is accessible by the administrator
immediately without any settings being made after it is switched on and connected to
the ISDN basic rate interface. This means that you save a lot of time and costs when
connecting other networks to your network because you do not have to travel to the other
network or instruct the staff on-site on configuring the router.