ELSA LANCOM Business LC-4X00, Руководство пользователя

Страница: 224 / 276

Description of the menu options
ELSA LANCOM Business
R54
a network that is known but is not currently available. The table is sorted by the network
numbers.
LAN-filter-table The LAN filter table permits the selective filtering of routes that are 'learned' via the local
network. Filtered routes do not appear in the IPX-RIP table.
A LAN filter table for filtering routes in the range from 00001000 to 00001fff might, for
example, have the following appearance:
WAN-filter-
table The WAN filter table permits the selective filtering of routes that are 'learned' via the
wide-area network. Filtered routes do not appear in the IPX-RIP table.
A WAN filter table for filtering routes in the range from 00002000 to 00002fff might, for
example, have the following appearance:
Routes/FRM
This parameter sets the maximum number of routes that can be included in a RIP frame.
The specified value originally defined by Novell is 50. Today, however, it is common
practice to pack a higher number of routes in each frame in order to reduce network
utilization. If all participating devices in the network support a higher number, this value
can be raised as high as 182.
Aging-minute(s) This option allows you to set the number of times the RIP table will be updated until an
entry in the RIP table ages, i.e. until the route recorded there is marked as 'not reachable
(down)'. You can enter a value from 1 to 60; the default value is 3.
Network Hops Tics Node-ID Time Flags
00000001 0 1 00a05702000a 0 local, direct
00000002 1 2 00608c70ab56 1 local
00000010 2 7 00A057020014 1 local, DOWN
00000081 1 6 00a05702000b 0 remote, direct
Start-net End-net
00001000 00001fff
Start-net End-net
00002000 00002fff