ELSA LANCOM Business LC-4X00, Руководство пользователя

Страница: 130 / 276

Workshop
ELSA LANCOM Business
120
cd /Setup/IP-router-module/IP-routing-table
set 10.1.131.0 255.255.255.0 Glasgow 2 off
cd /Setup/IP-router-module
set operating on
The routers in the branch offices each receive one entry for the central office. All
connections among the branch offices are thus routed via the central office.
Alternatively, the central offices can also communicate directly. For this purpose
they first acquire the same entries in the name list as in the router in the central
office. In addition, the same entries are contained in the routing table as in the
device in the central office, where the routing entry for the internal network is
replaced by the entry for the central office network.
햹
What's left to do? Naturally, the computers in the LAN also need to know that the
router is the switching center for the other networks. For this purpose the Intranet
address of the router is entered as default gateway for the workstations and
servers.
These settings can be assigned automatically when using the router as a DHCP server
(see 'DHCP Server').
The result
With the access from a computer in a branch to the central office network, it is now
possible to deviate to another inferface via the entry in the RoundRobin list, if the first
one dialed is busy.
Networks connected with the IPX router
The motivation
You can connect networks that use IPX/SPX as network protocol using the IPX router. For
example, you can connect the network of the central office to those of several branch
offices.
An example of the task
In this example the central office has four branches. A ”small“ router that connects to
the
ELSA LANCOM Business in the central office via ISDN dial-up connections is located
in each of the branch offices.