33
User Manual
MN032EN
Effective October 2017
215U-2 802.11
wireless I/O and gateway
EATON
www.eaton.com
Figure 43. User management
To add a user
1. Click
User Management
on the menu.
2. Click
Add User
.
3. Enter a username and password, and confirm the password.
Passwords must be at least eight characters.
4. Select a role for the user.
5. Click
Create
to add the user.
6. To add additional users, repeat steps 2 through 5.
7. When you have finished adding users, click
Save and Activate
Changes
.
To retire a user
1. Click
User Management
on the menu.
2. In the Status column for the user, click
Retire
.
3. Click
OK
to confirm.
The user’s status changes from “Active” to “Retired.”
4. Click
Save and Activate Changes
.
This disables access to the module by the retired user.
To change a user password
1. Click
User Management
on the menu.
2. In the Password column for the user, click
Change
.
3. Enter a new password for the user and confirm the new
password.
4. Click
Apply
.
5. Click
Save and Activate Changes
.
Recovery after lost admin password
If you lose the password for your admin account you can revert to
the default password by resetting the device configuration to factory
default. Refer to the section [Restoring the factory default settings]
on p42.
