Elos BIOTOPUS II, Руководство оператора

Страница: 53 / 72

BIOTOPUS II - Operator manual
Page 53
Miscellaneous
MOON PHASES
In case you own a fl uorescent moolight with dimmable capability or a low voltage
moonlight (0-10 Volts), your BIOTOPUS II provides you the signal (0-10 volts) to control the
dimmer in order to simulate the lunar phases. This task (task nr. 5) involves the real simula-
tion of moonlight, taking into account the duration as well as the intensity of the light, in
accordance to the chosen biotope.
Once the Moon Light (ML) is connected to the MULTIPLUG (factory setup assignes soc-
ket nr. 3 on MULTIPLUG B), simply connect the appropriate cable (available as optional)
between your Moon-Light 0-10 volt plug and the Moon Light plug on the display .
The same plug (on the display) can also be used to drive a low voltage Moon Light (0-10
volt). To set-up the lunar phase you should enter the LIGHT’s “
EXPERT MENU ’” and set to
“ YES ” the Moon phases simulation.