Elos BIOTOPUS II, Руководство оператора

Страница: 25 / 72

BIOTOPUS II - Operator manual
Page 25
I HAVE MADE A MISTAKE:
In case you have made a mistake choosing the Aquarium Type or the connected devi
ces/probe(s) you can verify and change what you have done.
Keep pressed for several seconds one of the four botton to enter the “EXPERT MODE”.
After the System hold time (see page 13 - SAFETY LOCK) the controller will prompt you :
<---> Calibration
<--->
Add/Remove Input
<---> Change Zone
<---> CONTINUE
CHANGE THE CONNECTED DEVICES:
Choose the “Add/REemove Input” procedure and proceed as described above under
the paraghraph “CONNECTED DEVICES”.
CHANGE THE AQUARIUM TYPE:
Once in the “Expert Mode”, choose “
Continue
” to be taken to the second window and
then choose “
Re-Set”
. You’ll need to confi rm (chose “
YES
”) and you’ll then be taken
to the INITIAL SETUP confi guration MENU’ where you can change all the parameter as
described above.