Elos BIOTOPUS II, Руководство оператора

Страница: 14 / 72

BIOTOPUS II - Operator manual
Page 14
Quick Start
PROGRAMMING: PROGRAMMING:
-----BASIC SETUP------- -----BASIC SETUP-------
In ELOS BIOTOPUS II the installation procedure have been simplifi ed. All you have to
know is the actual time and date, the aquarium type you are going to monitor (Marine
or Fresh Water) and which component you are going to connect to your DISPLAY UNIT
(Multiplug
(
s
)
, probe
(
s
)
etc.). You can then proceed with the programming procedure:
This section provides enough information to get your new equipment up and running.
You still will want to read through the rest of this manual. It provides valuable operation
tips and information that will allow you to use the features to full measure.
The fi rst time you’ll connect the BIOTOPUS II to the AC wall outlet, it will automatically
takes you to the
INITIAL SETUP
procedure.
Once in the INITIAL SETUP MENU’ your fi rst option will be to load the current time and
date.
CLOCK SETUP
First you’ll need to enter the
Hour
of the Day (00-24), than the
Hour Hour Minute
(01-59), then the
Day
of month (01-31), the
Day
of the week (Mon-Sun) the month
MM
(01-12) and the
year
Year
(2004-2999).
Year Year
Each time the controller will prompt you to press the “+” button (second from the TOP) to
increase the prompted value, the “-” Button (third from the TOP) to decrease the promp-
ted value or the
CONTINUE
button (fourth from the TOP) to
ACCEPT
the prompted value
and proceed to the next screen.