Elos BIOTOPUS II, Руководство оператора

Страница: 36 / 72

BIOTOPUS II - Operator manual
Page 36
NOTE: the event can only be consecutive one to the other. In case the “ Switch ON time ” and the “ Switch OFF
time
” of one event are the same, the event will not happen.
This is usefull in case you need to switch on the equipment (in the above example the ozonizator) less than four
times per day (see graphic below where, for T4, ON and OFF are set at the same time).
T1 ON=
08:00
T1 OFF=
09:30
T2 ON=
12:30
T2 OFF=
14:30
T3 ON=
16:30
T3 OFF=
17:30
ON
OFF
T4 ON=
18:00
T4 OFF=
18:00
You’ll need now to assign to the Timer, a Socket where you’ll connect the Ozonisator (in
this example let us decide to use socket nr. 3). You’ll need to connect the Ozonizator to
Socket nr. 3 and then you’ll need to inform your Biotopus II that you want to use this soc-
ket not to control the heater (see tab. at page 20) but the Timer.
Proceed as following: