Elmo 1/100, Руководство по установке

Страница: 48 / 88

Gold Twitter Installation Guide
MAN-G-TWI (Ver. 2.000)
|Feedback Connector FDB| www.elmomc.com
48
Table of Contents
Pin
FDB Signal Function
11 PortA_ENC_INDEX- Port A - index complement
12 PortB_EN/A Port B – index
RESOL Vref
13 HA Hall sensor A input
14 PortC_ENCO_A- Port C- channel A complement output
15 HB Hall sensor B input
16 PortC Port C- channel A output
17 HC Hall sensor C input
18 PortC_ENCO_B- Port C - channel B complement output
19 +5VE E5 V supply @ Limit 250 mA
20 PortC Port C - channel B output
21 COMRET Common return
22 PortC_ENCO_INDEX- Port C - index complement output
23 COMRET Common return
24 PortC_ENC Port C - index output
Table 8: Connector FDB – Feedback
For short distances between the drive and control, 0.5 to 1.0 m wires can be used and shielding
is not required.
For longer distances than 1.0 m and/or high EMI environment, shielded and
twisted wires should be used. Drain wires should be connected to Elmo COMRET.