Elmo 1/100 Скачать руководство пользователя страница 24

Страница: 24 / 88

Gold Twitter Installation Guide

MAN-G-TWI (Ver. 2.000)

|Logic and Control Cabling and Wiring|

www.elmomc.com

Table of Contents

8.5.

Logic and Control Cabling and Wiring

8.5.1.

Feedback ports, VL, RS232, USB, Analog Input

For short distances between the drive and control, 0.5 to 1.0 m wires can be used and shielding

is not required.

For longer distances than 1.0 m and/or high EMI environment, shielded and

twisted wires should be used. Drain wires should be connected to Elmo COMRET.

8.5.2.

Digital Inputs/Outputs, STO

Wires can be always used, no need for twisting, no need for shielding.

8.5.3.

EtherCAT or CAN Communication

Always use CAT5e cables.

8.5.4.

COMRET to PE Connection

Figure 9: COMRET Connection to the PE

At least one COMRET pin (Figure 9) must be connected to the Protective Earth (PE).

Earthing the COMRET by connecting the Earth (PE) to the drive COMRET is mandatory to insure
reliable operation, high noise immunity and rejection of voltage common mode interferences.

Содержание 1/100

























































































Результаты поиска

Содержание 1/100

Отзывы:

Elmo 1/100, Руководство по установке, Страница: 24 / 88

Результаты поиска

Содержание 1/100

Отзывы: