Elmo 1/100 Скачать руководство пользователя

Страница: 35 / 88

Gold Twitter Installation Guide

MAN-G-TWI (Ver. 2.000)

|Main Power and Control Connector|

www.elmomc.com

Table of Contents

10.2.

Main Power and Control Connector

This section describes the Main Power and the Control supply connector.

10.2.1.

Main Power

The VDC isolated from the Mains DC power source is not included with the Gold Twitter.

Pin

Function

Cable

Pin Positions

VP+

DC Pos. Power input

Power

Power output return

Power

Protective earth

Power

Table 6: Connector for Main Power

Connect the DC power cable to the VP+ and PR terminals on the main power connector.

To connect the Gold Twitter to the DC power source:

The source of the VDC power supply must be isolated from the Mains.

Verify that the rectified VDC is indeed within the range of the drive.

Connect the VP+ and PR wires to the terminals on the servo-drive.
It is highly recommended to twist the two DC main power cables at intervals of 10 cm.

Connect the PE to the closest earth connection near the power supply.

Connect the PR to the closest earth connection near the power supply.

Before applying power, first verify the polarity of the connection.

Содержание 1/100

























































































Результаты поиска

Содержание 1/100

Отзывы:

Похожие инструкции для 1/100

Бренды по названию

Популярные бренды

Elmo 1/100, Руководство по установке

Результаты поиска

Содержание 1/100

Отзывы:

Похожие инструкции для 1/100

Бренды по названию

Популярные бренды