Elkron FAP54, Руководство по установке

Страница: 34 / 40

34 FAP54 Installation
6 APPENDIXES
6.1 APPENDIX 1: ERROR CODES FOR CIRCUIT MODULE
The table below reports the error codes for the circuit modules and the relevant explanation:
Code Fault
1 Access error to the non volatile memory of the module
2 Program supervision error (1)
3 Fault in the output analog section of the module
4 The module does not answer to commands
5 Module removed
6 Module reset
7 Unexpected answer from the module (1)
8 Unexpected answer from the module (1)
9 Unexpected answer from the module (1)
10 Unexpected answer from the module (1)
11 Unexpected answer from the module (1)
12 Unexpected answer from the module (1)
13 Module is blocked (1)
14 Module not usable because of a serious line fault (e.g. short circuit, overload)
15 Fault in the module transmitter
16 Fault in the module transmitter
17 Data memory corrupted (1)
18 System memory corrupted (1)
19 System memory corrupted (1)
20 Code memory corrupted
21 Non volatile memory corrupted (1)
(1) Please, contact the ELKRON Customer Service.