Installation/Configuration ER600
7
1.2.2
DC6002I Micro-contact
A magnetic contact detector to monitor the opening and closing status of the door or window
where it is installed. It has wired inputs which may be used to connect a NC (Normally Closed)
contact of a wired device or a shutter or rolling blinds opening detector (use of wire contacts for
rolling blinds Elkron MF01 and MF02 is recommended).
It is powered by a lithium battery and communicates via radio with the ER600 two-way radio
module.
It is programmed by a jumper. A tamper guarantees protection against opening and removal. The
device has test, supervision, battery low signal, and LED to signal radio communication.
Available also in brown (DC6002I/BR).
Note: this device can be used in combination with an ER600 radio expansion
.
1.2.3
DC600 Micro-contact
Mini magnetic contact detector to monitor opening/closing of specific devices (e.g. a door or a
window). The contact is fixed onto the door or window frame, while the actuation magnet must be
fixed onto the door or window itself. When the door or window is opened, the magnet moves away
from the contact making the inner magnetic switch trip and activating the sending of an alarm
signal to the control panel. The device can also send information on faults and flat battery
indications.
It is powered by a lithium battery and communicates via radio with the ER600 two-way radio
module.
A tamper guarantees protection against opening and removal. The device has test, supervision,
battery low signal, and LED to signal radio communication.
Available also in brown (DC600/BR).
Note: this device can be used in combination with an ER600 radio expansion.
1.2.4
IR600 IR detector for internal
A passive infra-red detector to detect movements in the area it monitors.
It is powered by a lithium battery and communicates via radio with the ER600 two-way radio
module.
A tamper guarantees protection against opening and removal. The device has test, supervision,
battery low signal, and LED to signal radio communication
The device can be installed in an angular position by means of the bracket provided.
Note: this device can be used in combination with an ER600 radio expansion.
1.2.5
IRT600 IR detector curtain effect
Detector with passive infrared (PIR) motion sensor capable of detecting movements in an
assigned area and indicate them to the control panel to activate the intrusion alarm.
The base of the product is provided with holes for installing it on a flat surface or in a corner.
The detector has a single tamper micro switch which is activated when the lid is opened.
Furthermore, it can send a warning to indicate a communication problem or flat battery conditions.
The detector is designed to work within a detection field of 8 metres.
Note: this device can be used in combination with an ER600 radio expansion