Installation/Configuration ER600
27
9.1.5
Ancillary functions (Gong, Courtesy Light, Door Opener, Absence of Move)
Ancillary functions which can be used when the system is disarmed can be associated to the burglar inputs.
The ancillary functions only work if all the partitions assigned to the input are disarmed.
These functions are not EN50131 compliant because they are not described in the standard.
Only one of the following ancillary function options may be selected for each input: None, Absence of Move, Gong, Courtesy Light,
Door Opener.
9.1.6
Input attributes (Release Type, AND / OR partitions)
The operation of the burglar inputs may be customised further by setting the attributes.
9.1.7
AND inputs
This creates a logical connection between two burglar inputs with the same customisation.
9.1.8
Programming procedure
Proceed as follows to program the wireless inputs:
1) Enter
<Installer code>
, press
, then
and finally
repeatedly until PROGRAMMING
appears.
2) Press
and then press
several times until RADIO DEVICES appears.
3) Press
.
4) Press
and
to select the required radio expansion module. Press
to confirm
5) Press
and
to select the required wireless device (IR= infrared, DC=magnetic contact).
Press
to confirm.
6) Press
and
to select the input (In1 or In2). Press
to confirm.
7) Press
.
8) Change the logical address using keys
and the numeric keypad. Press
to confirm.
9) Press
.
10) Press
. Press
and
if the input must be used or not. Press
to confirm.
11) Press
.
12) Press
. Press
and
to assign the input to the SYSTEM (all partitions) or only to some
PARTITIONS. Press
to confirm
13) If SYSTEM is selected, press
and
to select SYSTEM ASSIGN or SYSTEM DO NOT
ASSIGN and press
to confirm. Then
.
UT00:INSTALLER
PROGRAMMING
PROGRAMMING
RADIO DEVICES
RADIO DEVICES
ER01:ER 01
ER01:ER 01
SELECT IR
SELECT DC
DC01:…
DC01:…
DC01.In1: InNNN
DC01.In1: InNNN
LOGIC NUMBER
LOGIC NUMBER
InNNx:...
DC01.In1: InNNN
INPUT TYPE
INPUT TYPE
USED
DC01.In1: InNNN
ASSIGN
ASSIGN
SYSTEM
