Elka P 2500 Скачать руководство пользователя страница 10

Страница: 10 / 58

P 2500 - P 5000

WARNING!

Danger of impact and crushing!

During the barrier movement, energy is saved in the
springs. The springs are not tight and thus energy-free only
in barrier position OPEN.



Mount and dismount the springs in barrier position

OPEN only. If necessary open the barrier by mechanical
emergency release and move the barrier manually into
position OPEN.

WARNING!

Risk of crushing

During the barrier movement crushing points arise at many
points of the barrier mechanics.



Before installation, maintenance or repair work at the

barrier mechanics turn the power supply off and secure
it against unintentional restarting.

WARNING!

Danger through voltage!

Danger of an electric shock.



Before installation, maintenance or repair work at the

barrier mechanics turn the power supply off and secure
it against unintentional restarting.

WARNING!

Danger of impact!

Accident hazard by barrier boom movement.



Keep a sufficient safety distance (min. 19.7in) during the

barrier movement



Children are not allowed to play within the barrier area

or operate the barrier.



Opening and closing of the barrier is only allowed with

the barrier in view. No persons or objects are allowed in
the danger zone.

WARNING!

Danger of crushing!

Crushing points arise at many areas of the barrier
mechanics during the barrier movement.



Disconnect the barrier from the power supply before

installation, maintenance or repair work at the barrier
mechanics and secure against reactivation.

Содержание P 2500



























































Результаты поиска

Содержание P 2500

Отзывы:

Похожие инструкции для P 2500

Бренды по названию

Популярные бренды

Elka P 2500, Инструкция по установке и эксплуатации

Результаты поиска

Содержание P 2500

Отзывы:

Похожие инструкции для P 2500

Бренды по названию

Популярные бренды