Elite Cube Digital, Инструкция по эксплуатации

Страница: 18 / 84

18
ENGLISH
EN
Thank you for purchasing the Cube
Digital
INTRODUCTION
The Cube Digital is a training roller that will help
you improve your performance thanks to the use
of specific training modes. With the cycle compu-
ter you can display your instantaneous, average
and maximum data at any time. And thanks to an
intuitive interface , you can customise your trai-
ning according to your ability.
HEART-RATE MONITOR
The Cube Digital has an internal receiver for
heart-rate monitors with chest strap. This ena-
bles the rider’s heart-rate to be measured and
shown on the screen during the race. The heart-
rate monitor does not come with the product.
The heart-rate monitor receiver of the Cube
Digital is compatible with all ANT+ type transmit-
ters.
CADENCE SENSOR
The Cube Digital roller does not use a sensor for
measuring the cadence. This is possible thanks
to a sophisticated calculation based on the
speed. Since this is not a direct measurement,
but the result of a calculation, in particular situa-
tions the cadence value may not be accurate.
If a more precise measurement is required, an
optional cadence sensor can be connected to the
roller. Contact Elite srl (contatto@elite-it.com)
for further information .
IMPORTANT
• Do not brake when using the trainer,
as this can permanently damage roller and tyre.
• The resistance unit heats up considerably
when in use. Therefore make sure
to wait until it cools before touching the flywheel