Elite Greenhouses 7'5" WIDE TITAN, Инструкции и иллюстрации

Страница: 6 / 32


When constructing a painted model please take care not to damage the finish by working on
concrete or patios.

We reserve the right to alter and improve our products.
Various video’s on selected installation processes are available on our website.
www.elite-greenhouses.co.uk
DETAILED ASSEMBLY INSTRUCTIONS
The contents of this carton are divided into the different frame assemblies that collectively
make up the completed unit.
It is recommended that each frame assembly is fully completed before moving on to the next.
The frames to be constructed are as follows:
1.
SIDE FRAME – Two off.
2. REAR GABLE – One off.
3.
DOOR GABLE – One off.
4. ROOF VENT – One for 6 x 8, two for 8 x 8, 10 x 8, 12 x 8, four for 14 x 8 and 16 x 8,
six for 18 x 8 and 20 x 8.
5. DOOR(S) – Two off 18” wide
6.
LOUVRE
7.
Additional parts such as the ridge, roof bars, eave ties etc. are put on “loose” and are not
pre-constructed into an independent frame. The partition, if appropriate is constructed in
situ and not as an independent frame.
WE CAN NOW COMMENCE WITH THE ASSEMBLY !