Eliet Superprof 2000, Руководство пользователя

Страница: 70 / 76

E
n
g
li
sh
• Hook the belt conveyor onto the attachment points (1) provided on the shredder.
• Make sure that the hydraulic pipes do not become damaged during this operation.
• Connect the quick fit connectors (prevent the connector ends from becoming dirty; if neces-
sary, clean them first).
• Close the safety guard and all ow it to rest on the belt conveyor.
• An additional switch valve, situated at the underside of the feed hopper, enables you to start
the belt conveyor.
• Remove the locking pin (2) first and then press the control handle down.
Note : After machine start-up, first switch on the discharge belt conveyor before feeding branch- es
into the feeding hopper.
Detaching the belt conveyor
Caution :
Always switch off the engine before removing the conveyor belt.
• Open the safety guard.
• Disconnect the hydraulic quick fit connectors.
• Connect the two hydraulic pipes to each other in order to prevent damage or contamination.
• Refit the blanking caps to the hydraulic quick fit connectors of the machine.
• Using two persons, support the belt conveyor and unhook it.
Caution :
Do not underestimate the weight of this discharge belt conveyor.