Eliet Superprof 2000, Руководство пользователя

Страница: 38 / 76

E
n
g
li
sh
9.7.2 Engine cuts out and the oil level pilot light
comes on
• Stop the engine and remove the ignition key.
• Check the engine oil (see Chapter 11.3.1 ) ; if necessary, top it off.
• If the oil level is OK, this problem could also be caused by an electri cal defect.
9.7.3 Engine stalls while running
• Safety cap open.
• Oil low-level fault.
• Out of petrol.
• Electri cal defect
9.7.4 Starter motor does not operate during
starting
• Safety guard is open.
• Battery is in a low state of charge.
• Defect in electric circuits
• Engine oil low-level fault.
9.7.5 Capacity decreases
• Dirty air fil ter.
• Fuel fil ter in need of cleaning.
• Dirty or fouled spark plug.
• Blades are blunt.
• Incorrect tension of V-belt.
9.7.6 Wheel drive does not operate when petrol
engine is running.
• Safety handle is not in neutral position.
• Defect in the hydraulic circuit.
9.7.7 Feed roller no longer operates
• Engine speed too low.
• ABM in disorder (Contact your ELIET dealer).
• Problem in the hydraulic circuit (valve).
• Chain broken.
9.7.8 Engine no longer runs and the machine
must be moved.
If the engine is not running, the rear wheels are no longer driven.
• If you turn the control handle on the steering, you are still able to slowly m ove the machine (us-
ing the force of the operator).
• If the latter is not possibl e, and the engine no longer runs due to a blocked rotor, you m ay wish
to take off the drive belts. This ensures that the rotor is no longer driven and that the engine can be
restarted.