Eliet Superprof 2000, Руководство пользователя

Страница: 35 / 76

E
n
g
li
sh
Warning :
Do not lean forwards to push material
further into the loading hopper so that
your hands NEVER go past the safety
screen.
• By reducing the amount of material that you feed into the machine, it will operate more opti-
mally.
• In the case of branches, it is recommended to feed in the thickest part of the branch first.
• It is preferable to feed thick branches into the left-hand side of the loading hopper.
• You can determine the feeding-in speed as follows:
- Without ABM: You li sten to the sound of the engine: if you hear that
the engine speed decreases substantiall y, this indicates that the engine
is encountering problems (speed decreases below 2500 rev./min.). If
this happens, stop the material from being fed in by m oving the
control handle away from you (position 3). When the
engine returns to its normal speed, you can restart the feed roller by
m oving the control handle to the centre position (position 2).
- With ABM: The feed roller stops when engine speed is too low (<
2750 rpm ) ; the green warning light (1) lights up. When the engine
returns to its normal speed, restart the feed roller.
- With speed governing : If you selected this option (rotary knob un-
derneath the loading hopper), you can control the speed of the feed
roller according to the material to be fed in. By adjusting the knob (in
the range of 1 to 10), you can obtain maximum efficiency.
• By pulling the control handle to position 1, the feed roller changes
direction. This is useful if a piece of wood becomes wedged under-
neath the feed roller.
• To stop the material from being fed in, push the control handle to
position 3.
• If the amount of chippings block off the output opening, m ove the
machine backwards. The pile m ay not be higher than the bottom of the