Eliet Superprof 2000, Руководство пользователя

Страница: 37 / 76

E nglish
With moist material s, it is best to use a sieve for damp products.
(Order number : MA 002 001 001)
• Read the fitting instructions in Chapter 13.1 on pag. 52
• If the shredding chamber gets clogged up, switch off the machine to remove the blockage.
Make sure to wait for the blades to come to a complete standstill, before carrying out any opera-
tion on the machine. For safety’s sake, disconnect the spark plug wire.
Warning :
In order to avoid personal serious injury or damage to properties,
never operate the machine without a sieve screen fitted.
• If you notice a foreign object in the garden waste in the loading hopper, perform the foll owing
steps:
- Stop the feed roller by pushing the control handle to position 3.
- Move the throttle control lever to the minimum position.
- Stop the engine using the ignition key.
- Remove any foreign objects.
• If you notice a strange noise during the work, immediately stop shredding. Stop the engine and
investigate the cause of the defect. Before proceeding, perform the necessary repairs.
9.7 Troubleshooting
9.7.1 Rotor stalls
• Turn the key to the OFF position and remove it from the igni-
tion switch. (see Chapter 9.4).
• Open the shredding chamber (see Chapter 11.2.4).
• Completely empty the shredding chamber and make sure that no
pieces of wood are wedged in the knife drum (1). If, despite this,
the knife drum is still jammed, this indicates a mechanical
problem (e.g. a bearing that has seized, etc.).
Caution :
Wear protecti ve gloves as the blades are razor sharp !