Eliet Maestro City Electro, Руководство пользователя

Страница: 41 / 54

1
2
3
4
5
6
1
1 2
2
3
4
5
6
3 4
5
6
(F)
(F) (F)
(F)
(F)
(F)
(B)
(B)
(B)
(B)
(B)
(B)
41
English
You may not simply randomly reinstall the blades. A specific
order needs to be respected.
• Number the blade positions on the blade disc from 1 to 6
to ensure mistakes cannot be made. Start numbering with
the right blade position that shows a notch and number
clockwise (as viewed from the tightening side).
• Next, position the new blades as indicated in the drawing
below. Keep the position of sides F and B in mind.
• Before fitting a new blade in between the
two blade discs, first remove any dirt that
may have built up between both mating discs.
TIP: To do so, use a stripping knife and compressed air.
• Always fit new bolts and nuts when replacing chipping
blades. (This will also have been supplied when order-
ing a blade set.)
• Always make sure to refit the bolts in the blade hold-
ers in such a way as to ensure the nuts are on the
tightening side . This will ensure the direction of rota-
tion to secure the blade shaft against loosening.
Caution:
Incorrectly or poorly installed blades may lead to breakdowns or damage
to the machine. Operators and bystanders are also put at risk.