Eliet Maestro City Electro, Руководство пользователя

Страница: 39 / 54

180°
180°
39
English
Each blade is held in place with three M6 bolts. Fully loosen the nuts of each blade and remove
the bolts.
For your information:
Remove and refit one blade at a time. This ensures that reversal is performed in
an orderly manner.
TIP: There are 36 bolt connections in each blade shaft. ELIET recommend using a pneumatic
ratchet wrench to quickly loosen these. Place a ring spanner on the bolt head and loosen the nut
using the ratchet wrench ratchet. (SW 10)
Caution:
If you loosen the bolt connections manually, avoid injuries to hands by using
two ring spanners with long handles. (SW 10)
• Replace damaged bolts and nuts immediately. (Part Nr. bolt: BS 511 000 618 ; nut: BS 502 000 600)
• Do not pull away the blades using your hands but use a self-grip wrench.
• It is useful to put a wedge (screwdriver) in-between the blade discs to ensure it is easy to
release them.
• Rotate the blade numbered 1 through 180° and
fit it into position 4. Rotate the released blade 4
through 180° back into position 1.
• Rotate the blade numbered 2 through 180° and
fit it into position 6. Rotate the released blade 6
through 180° back into position 2.
• Rotate the blade numbered 3 through 180° and
fit it into position 5. Rotate the released blade 5
through 180° back into position 3.