Eliet Maestro City Electro, Руководство пользователя

Страница: 37 / 54

37
English
• Carefully close the shredding chamber after Sharpening. (“read § 16.2
Opening and closing the shredding chamber” on page 50)
11.3.4 Reversing and changing chipper blades
If the blades are regularly ground, a blade life of more than 50 hours can be
guaranteed per cutting edge. When one cutting edge is totally used, you can reverse the blade and
you will have another 50 hours. If both blade edges are worn, replace the blade as a whole.
Caution:
Any entitlement to claim on the guarantee will be excluded in case of damage
or consequential damage that occurs due to faulty maintenance of the blades.
Consult your official ELIET dealer for advice if required.
11.3.4.1 Work method for reversing the blades
Warning:
Wear protective gloves as the blades are razor sharp!
• Stop the machine and disconnect the power supply extension cable from the machine.
Warning:
The blades may continue to rotate for a few seconds after the motor is switched
off. Always check whether the blade shaft has come to a complete standstill.
• Open the shredding chamber (“read § 16.2 Opening
and closing the shredding chamber” on page 50)
• Remove the blade shaft from the machine to reverse
the blades. (“read § 16.3 Removing and reinstalling
the blade shaft” on page 51.)
• For safety’s sake, firmly clamp the blade shaft (i.e.
In-between a bench vice) and ensure that this cannot
twist, move or fall unexpectedly during maintenance and, thus, injure someone.