Eliet Maestro City Electro, Руководство пользователя

Страница: 26 / 54

26
English
REMOVING THE Collecting BAG = MOTOR SHUT OFF
Normally, the engine shuts off if the feed hopper is loosened. If this is not the case, the machine
operator will turn off the machine manually with the switch on the motor. The defect must be
fixed immediately before proceeding the work.
REMOVING THE FEED HOPPER = MOTOR SHUT OFF
9.4 Emptying the collecting bag
• The bag needs emptying when the waste chippings in the collecting bag has reached the
bottom of the discharge chute of the machine.
• In order to do so, always first make sure to shut off the engine (failure to do so will cause the
engine to cut out automatically on collecting bag removal).
• Failure to empty the bag in time will cause the shredding chamber to get clogged up and finally
come to a stop . (“read § 9.5 What to do about motor stalling” on page 27)
Caution:
A machine that does clog up is a sure source of overheating with the resultant
increase in fire hazard.
• The collecting bag has an approximative 60 L / 16 US gallon capacity.
Warning:
Once full, the collecting bag can be pretty heavy. Which means - make sure to
hold the collecting bag close in towards your body as close as possible first and
then lift using your leg muscles. (Lift keeping back straight and bend legs at the
knees.) Know your own capability. The mere fact of lifting things beyond your
personal capacity a mere few centimetres does serious damage. Seek assistance
when lifting things that are too heavy for you.
• Either you can empty the contents of the collecting bag in to a wheel barrow, or you can carry
the full bag to the dumping area using the wheel barrow.
• What’s more, the machine can be used for transporting the collecting bag once full.
• When refitting the collecting bag you can secure it in position using locating pins.