Eliet Maestro City Electro, Руководство пользователя

Страница: 40 / 54

40
English
Repeat this procedure for the second blade disc.
• Always make sure to refit the bolts in the blade holders
in such a way as to ensure the nuts are on the tighten-
ing side . This will ensure the direction of rotation to
secure the blade shaft against loosening.
Caution:
After reversing the chipping blades, always check the bolts for correct tightness
after expiry of the first 5 hour run. Ignoring this operation may cause serious
injury and may even lead to death. The machine may also be significantly dam-
aged.
11.3.4.2 Work method for replacing the blades
New sets of blades are available form your ELIET dealer under the following part number: BU 401
100 102
• Stop the machine and disconnect the power supply extension cable from the machine.
Warning:
The blades may continue to rotate for a few seconds after the motor is switched
off. Always check whether the blade shaft has come to a complete standstill
before removing the shredding chamber cover.
• Open the shredding chamber (“read § 16.2 Opening and closing the shredding chamber” on
page 50).
Warning:
Wear protective gloves as the blades are razor sharp!
• Remove the blade shaft from the machine to replace the blades (see annex 3).
• For safety’s sake, firmly clamp the blade shaft (i.e. In-between a bench vice) and ensure that
this cannot twist, move or fall unexpectedly during maintenance and, thus, injure someone.
• When replacing the chipping blades, simply remove the old ones and replace them with new
items.