Eliet Maestro City Electro, Руководство пользователя

Страница: 21 / 54

21
English
• First apply some grease to the shaft from the wheel holder. Now slide the
wheels with stem facing outside on the shaft and secure them using the
starlock fasteners.
•
• Next, slide the wheel holder into the machine chassis. Push the wheel
holder in even increments until the frame tubes are a sliding fit over the
vertical tube ends of the wheel holder. The wheel holder can be locked in
this position by screwing an M8 bolt in the provided nut on the right frame
tube.
• Mount the handle of the collecting bag. Slide the
synthetic tube on each side of the tube holder. These
are firmly bolted to the frame using the bolts and nuts
that are included. (2xM6 - Wrench 10)
• slide the frame for the collecting bag out of the chas-
sis. Now clip the plastics around the frame as depicted
• To mount the handle to the funnel screw this in the upper side in the vibration dampers where
the anti projection shield is mounted. To prevent the anti-projection plate, at a breaking down the
rubbers would end up in the blade system, it is mounted between a nylon safety trip. (see draw-
ing below)