Eliet Maestro City Electro, Руководство пользователя

Страница: 27 / 54

27
English
9.5 What to do about motor stalling
Motor stalling can be traced to overloading, overfeeding, discharge blockage or the power supply
being down. You can very simply restart the chipper in these cases. Proceed as follows :
1. Check that the extension cord has not become loose. Both at the machine and the connec-
tion to the electric mains.
2. Remove all branches from the feed-in opening.
3. Check whether the chipping chamber is already full and whether wood residue may not be
blocking the blade shaft.
4. Empty, if required, the chipping chamber to make restarting easier. Open the chipping cham-
ber in accordance with the procedure described in annex 2.
Caution :
Always wear gloves when performing maintenance. You will be near the blades
when emptying the chipping chamber. They are razor-sharp and, therefore,
represent a real risk of leading to cutting injuries. Take care and try to avoid all
contact.
5. Check whether the motor protection relay on the machine or the mains fuse has tripped.
When the motor is overloaded, the overload protection will automatically push out the green
start button.
6. The red stop button may have been pressed unintentionally.
7. Just try to push the green start button again. Check through the window to see whether the
blade shaft is not again starting up.
8 . Should the motor make an abnormal humming noise, this may point to a blockage and the
issue must be further investigated or an official ELIET dealer must be consulted.
9. Should the green start button immediately protrude again, this may mean that the motor is
still overheated and that you should allow it to cool down.
10. Should there be no reaction when you press the star button and the motor does not seem
to want to get started, this may mean that one of the safety switches has been deactivated.
Check whether the collection box has been correctly positioned and whether the window
elements have been correctly mounted. If the machine does not want to start up after chec-
king these two points, consult your official ELIET dealer. (Find an authorized ELIET dealer
near you by visiting
www.eliet.eu .)
Perform the work more carefully in the future in order to avoid jamming of the machine.
Should you notice a strange noise after the machine starts up, immediately stop the machine to
prevent consequential damage. Stop the motor, disconnect the plug and investigate the cause of
the defect. Before proceeding, have the necessary repairs performed.