ELETTROLASER MS 3.5, Руководство пользователя и по обслуживанию

Страница: 35 / 108

code: UMS012 review: 0.2 date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual page 35 of 102
6.3 Manual handling of loads
Manual handling of loads (MHL) must be carried out in safe conditions to avoid overloading the dorsal-lumbar tract of the spine.
Please find below a series of safety instructions concerning manual handling of loads.
WARNING!: Lifting and handling operations must be performed in compliance with maximum weight liftable by a person 10 ; use
specific lifting devices to avoid the risk of any back injuries.
PROHIBITION!: Do not manually lift products that exceed the permissible limit!
In any case, it is important to remember that during manual handling activities, operators are subject to the following risks:
•
Falling of loads;
•
Crushing of feet.
To prevent risks deriving from incorrect handling of loads, please observe the following general indications:
•
Make sure the floor is stable and smooth;
•
If possible, use suitable transportation devices (e.g. hand pallet trucks Fig. 6-1, forklifts or cranes);
Fig. 6-1 -
Transportation devices
•
Hold a stable position;
•
Flex your knees (at a 90° angle) and use the muscles in your legs to lift the load. Lift the load slowly, while keeping your back
straight (Fig. 6-2);
Fig. 6-2 –
Lifting technique
•
Avoid torsions of the bust (Fig. 6-3);
10 25 kg for men and 15 kg for women, according to the ISO 11228-1 standard (also check the limits set by national laws regarding
the health and safety of workers).