ELETTROLASER MS 3.5, Руководство пользователя и по обслуживанию

Страница: 65 / 108

code: UMS012 review: 0.2 date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual page 65 of 102
7.5 Preliminary regulation operations
WARNING!: Failure to perform preliminary regulation operations can cause damage to the machine and/or installed equipment.
WARNING!: All preliminary regulation operations must be performed with the machine switched off.
If certain regulation operations require activation of the machine devices, strictly follow indications listed in chapter 8
“ Operation
instructions ”.
Before starting the machine, you may need to perform a series of preliminary regulation operations described in the following
paragraphs
.
7.5.1 Regulation of the binocular
Regulation of the binocular requires particular care, as imprecise regulation of this device can jeopardize the entire focus process
and consequently the quality of welding operations.
The right ocular features a reticle pointer which must be aligned with the laser in order to start welding in the correct position.
To regulate the binocular, please follow the sequence of operations described in the following Tab. 7-3.
Symbol Action Feedback / notes
•
Use the ring to regulate both oculars on the neutral diopter
(
⚫
);
•
Keep using the ring ( + / - ) to focus your view;
•
Operate on each single ocular to perform dioptric
corrections, if required.
Fig. 7-20 – Focus / dioptric regulation
If you do not use glasses, we recommend using the (removable)
eye cups supplied with the machine.
Fig. 7-21 -
Eye cups
Place an object under the focal lens at a height where it is in
focus and then proceed to regulate the binocular width so that
you have a single shadowless circle and a clear view when
observing its contents.
Fig. 7-22 – Binocular width
Tab. 7-3 – Regulation of the binocular
Ring