ELETTROLASER MS 3.5, Руководство пользователя и по обслуживанию

Страница: 92 / 108

code: UMS012 review: 0.2 date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual page 92 of 102
9.5
Cleaning the machine
WARNING!: Every cleaning operation must be performed with the machine switched off, after having disconnected all sources of
electrical power supply from it. This is the only way to make sure that no accidental starting of the machine will occur while the
staff in charge of cleaning it is working.
Please observe the following warnings when cleaning the machine or some of its parts:
•
Do not use water or other fluids to clean electrical equipment. To remove any dust deposits, simply use a clean brush or a dry
rag;
•
Do not use pressurized air or water sprays to clean the machine. If necessary, use an aspirator;
•
Do not clean surfaces with alcohol or solvents. Use specific detergents only;
•
Do not clean the lenses and the filters with solvents or other flammable substances;
•
Dispose of cleaning materials in compliance with currently effective laws on the subject. Do not disperse used materials or
cleaning residues in the environment.
Periodically, you will need to remove dust accumulations and/or processing waste to avoid their dispersion in the workplace.
Frequency of cleaning operations depends on the quantity of waste on the machine. In any case, we recommend cleaning the
machine at the end of the work shift
every day .
Waste is removed manually by using a suitable industrial aspirator.
Always use a normal vacuum to clean the fans
– both the cooling fans and the smoke extraction fan inside the welding chamber. This
operation should be carried out periodically, based on usage.
OBLIGATION!: Suitable personal protective equipment for the respiratory tract and the eyes must be worn during all cleaning
operations.
WARNING!: Do not use pressurized air for cleaning operations. Use an industrial aspirator.
9.6 Spare parts
If you need to purchase spare parts (or consumables), please contact the support service (please refer to chapter 12).